Using silica sand for paddle courts is very common which include tennis courts. There are a few important reasons why we use silica sand for paddle courts.
Firstly, it generates a more regular and consistency of the ball. Secondly, it favors player movements, minimizing slips and the injuries which occur with them.
Thirdly, it extends the life of your turf. If filaments are not present, the grass would crush and wear out considerably sooner. Their presence helps to maintain the various fibers straight and allows for easier maintenance.
Fourthly, because the silica keeps moisture out of the track, it limits the growth of fungi and other organisms.
As a result, we perform a sweep to equally spread the sand on the court, which tends to accumulate in the backdrops, the center of the track, and around the net.
There are several types, but the most popular is silica sand for cesped, which comes in particle sizes ranging from 0.5 to 0.8 mm. However, silica sand isn’t only on paddle courts. It’s also in the creation of horse-riding tracks.
Silica sand is the basic raw material that creates both the best tracks with automatic irrigation systems and the more basic tracks, with the only difference being how you use them.
Water acts in the silica through oversaturation, i.e. the sand is saturated with water, and from this point on, the water runs over the sand in the same way it would on glass, as long as the sub appropriate base and slopes are used.
These properties must be present in sand:
– Fine granulometry (type 0.06/0.35 mm)
To stay away from:
– Crushed sand is abrasive and does not fit in the summer due to the amount of dust, but it forms the hard surface in the winter.
– The ground will become excessively soft if the sand is too thick.
– Because the ground is slippery, alluvial sand makes the horse feel unsafe and prevents it from giving his best.